Coyote Overheat Alarm: the pellet grill has run past its top temperature
Each Coyote pellet grill has a top temperature set by its size, and the controller alarms when the grill runs past it.
Mon–Sat, 8am–8pm
- Temperature and probes
- Pellet grill auger and controller repair
- Source: Coyote
Book a visit
Three short steps, about a minute.
or call (844) 660-6426
Loading appointment form…
The appointment form couldn’t load. Please try again.
What Overheat Alarm
actually means.
Each Coyote pellet grill has a top temperature set by its size, and the controller alarms when the grill runs past it. The manual links high heat to grease buildup, to too many pellets in the burner pot at start-up, and to using the sear grate outside Sear Mode.
Coyote grill display · also shown as Over Heat Alarm
What to do when Overheat Alarm shows on the grillKind of codeTemperature and probes
A probe is sending the controller a reading it cannot trust, or no reading at all: the grill's own temperature sensor coated in smoke and grease, its lead pinched or melted, or a meat probe unplugged, wet or reading far outside what any cook box could reach. The grill then overshoots, stalls or shuts down to be safe. Wiping the sensor once the grill is cold and reseating the probe in its jack are reasonable steps; a sensor that still reads wrong is a visit.
Usually leads toPellet grill auger and controller repair
Jammed augers, dead hot rods, weak combustion fans, lying probes and failed controllers on pellet grills, traced and replaced with the maker's parts.
Shows up asGrill Error Code on a Pellet Controller or Digital Panel
A grill error code shows as letters and numbers on a pellet grill controller, a flashing light on a digital control panel, or an alert in the maker's app paired with the grill.
MakeCoyote
On a Coyote call, the tech clears the firebox of grease and debris before judging a weak burner, since a clogged tray can mimic a gas problem.
SourceCoyote Outdoor Living Pellet Grill use and care manual (C2P28, C2P36)
C2P36 (700°F) and C2P28 (650°F). The C1P manual gives the same limits and says the alarm sounds if the grill reaches 750°F.
Before you book,
in this order.
Each step comes from Coyote's own guidance for Overheat Alarm on its grills. Follow it to the end: the last card says whether this is a visit.
If grease is burning, keep the lid closed if you can do it safely and never use water; if the fire spreads, move away and call 911.
Otherwise press the red stop icon and let the full cooldown cycle run.
Once the grill is cold, clean the drip trays and heat shield, take the sear grate out unless you cook in Sear Mode, and book a visit if the alarm returns on a clean grill at a normal setting.
Still there?
It usually turns into pellet grill auger and controller repair. Book with the code and the model number.
What not to do
The alarm concerns the grill chamber, not the meat probes, which only report the food. It is not a sign of a broken controller either; a grill with a greasy tray that reads 700°F is very likely that hot.
What you may
notice with it.
The grill problems Overheat Alarm tends to arrive with. Answer these at the grill before anyone is booked.
All problems
Where Overheat Alarm usually leads
Pellet grill auger and controller repair.
Coyote
grills.
On a Coyote call, the tech clears the firebox of grease and debris before judging a weak burner, since a clogged tray can mimic a gas problem.
Coyote grill repairMore Coyote codes
Temperature and probes on other makes
Built-in gas grill
A stainless grill head dropped into a masonry or steel island, fed by a tank or the house gas line, with its burners, knobs and lid working in open weather.
Freestanding gas grill
A gas grill on its own cart with wheels, side shelves and a propane tank below, or a hose to a house gas outlet, rolled into place on the patio.
Infrared grill
Grills that cook with radiant heat: ceramic or mesh infrared burners, sear stations beside the main burners, and radiant glass or emitter plates over a gas flame.
In Coyote's own words
The alarm will activate if the grill exceeds 700°F for the 36” model or 650°F for the 28” model.
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. C2P36 (700°F) and C2P28 (650°F). The C1P manual gives the same limits and says the alarm sounds if the grill reaches 750°F.
Coyote Overheat Alarm grill repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about Overheat Alarm.
Can I clear Overheat Alarm myself?
Why does my Coyote overheat when I use the sear grate?
Can a dirty drip tray set off the Coyote Overheat Alarm?
Should I switch the Coyote off at the power button when it overheats?
Back to your everyday
Still showing Overheat Alarm?
A booking with a code goes further when it has the code copied exactly, the model and serial from the rating label, and a word on whether the grill still lights, heats or feeds pellets. With those three the office can match the likely part to your grill the same day.