Lynx SmartGrill "Burner has no flame": gas to that burner has been closed
The controller watches each burner after lighting.
Mon–Sat, 8am–8pm
- Flame and gas flow
- Grill valve and regulator repair
- Source: Lynx
Book a visit
Three short steps, about a minute.
or call (844) 660-6426
Loading appointment form…
The appointment form couldn’t load. Please try again.
What Burner N has no flame
actually means.
The controller watches each burner after lighting. When it cannot find a flame, whether the burner never caught or went out later, it closes that burner off and names it by number or as the top rotisserie burner.
Lynx grill display
What to do when Burner N has no flame shows on the grillKind of codeFlame and gas flow
The control lost its flame or never found enough gas to hold one. The common reasons are plain: a propane regulator that dropped into its low-flow safety mode because the tank valve was opened with a knob on, a tank running empty, wind across an open burner, or a flame sensor coated in grease. Knobs off, the tank closed and reopened slowly, then a relight usually settles the first; if you smell gas, walk away first, and the valve, the sensor and every fitting stay with a technician.
Usually leads toGrill valve and regulator repair
Stiff, leaking or unshuttable grill valves, worn knobs, tired regulators and cracked hoses replaced, with gas orifices matched to propane or natural gas.
Shows up asGrill Error Code on a Pellet Controller or Digital Panel
A grill error code shows as letters and numbers on a pellet grill controller, a flashing light on a digital control panel, or an alert in the maker's app paired with the grill.
MakeLynx
A Lynx grill visit opens with the lid raised and every burner lit once, so the tech sees which ports burn blue and which ones sputter.
SourceSmartGrill by Lynx care and use / installation manual (SMART30, SMART36, SMART42 and F models)
SmartGrill by Lynx built-in and freestanding heads (SMART30, SMART36, SMART42, with F suffix on the cart versions) speak this line through the grill and send the same text to the app. Lynx Professional and Sedona grills with ordinary knobs have no such messages.
Before you book,
in this order.
Each step comes from Lynx's own guidance for Burner N has no flame on its grills. Follow it to the end: the last card says whether this is a visit.
Leave that burner off and wait five minutes before any other burner is lit.
Check the gas shutoff, the tank level and that the regulator hose is the Lynx one for your fuel.
If the burner still shows no flame with gas confirmed, book a visit to check the burner for blockages and the gas line to it.
Still there?
It usually turns into grill valve and regulator repair. Book with the code and the model number.
What not to do
No flame is not the same as the igniter never heating; that has its own message. It also does not mean a gas leak, although a gas smell at the grill should always be treated as one.
What you may
notice with it.
The grill problems Burner N has no flame tends to arrive with. Answer these at the grill before anyone is booked.
All problems
Where Burner N has no flame usually leads
Grill valve and regulator repair.
Lynx
grills.
A Lynx grill visit opens with the lid raised and every burner lit once, so the tech sees which ports burn blue and which ones sputter.
Lynx grill repairMore Lynx codes
Flame and gas flow on other makes
All 5 codes of this kind
Built-in gas grill
A stainless grill head dropped into a masonry or steel island, fed by a tank or the house gas line, with its burners, knobs and lid working in open weather.
Freestanding gas grill
A gas grill on its own cart with wheels, side shelves and a propane tank below, or a hose to a house gas outlet, rolled into place on the patio.
Infrared grill
Grills that cook with radiant heat: ceramic or mesh infrared burners, sear stations beside the main burners, and radiant glass or emitter plates over a gas flame.
In Lynx's own words
If the burner has no flame, SmartGrill will turn off the gas to that burner.
Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. SmartGrill by Lynx built-in and freestanding heads (SMART30, SMART36, SMART42, with F suffix on the cart versions) speak this line through the grill and send the same text to the app. Lynx Professional and Sedona grills with ordinary knobs have no such messages.
Lynx Burner N has no flame grill repair,
where we come out.
The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.
All service areasTampa BayFL · 31 areas
Miami / South FloridaFL · 47 areas
New York MetroNY · 75 areas
HoustonTX · 36 areas
ChicagoIL · 50 areas
Los AngelesCA · 95 areas
San DiegoCA · 31 areas
Questions
about Burner N has no flame.
Can I clear Burner N has no flame myself?
Does "Burner 4 has no flame" on a Lynx SmartGrill mean the rotisserie burner?
Why does my SmartGrill say has no flame after running fine for an hour?
Can I relight right away after a no flame message?
Back to your everyday
Still showing Burner N has no flame?
A booking with a code goes further when it has the code copied exactly, the model and serial from the rating label, and a word on whether the grill still lights, heats or feeds pellets. With those three the office can match the likely part to your grill the same day.